| 1. | Cleavage fracture strength
解理断裂强度 |
| 2. | Standard test method for fracture strength in cleavage of adhesives in bonded joints
胶粘连接中胶粘剂开裂时断裂强度的标准试验方法 |
| 3. | Standard test method for fracture strength in cleavage of adhesives in bonded metal joints
粘结接头中胶粘剂的断裂强度的标准试验方法 |
| 4. | An investigation on force controlling method for measuring fracture strength and toughness of diamond film
测定金刚石膜断裂强度及断裂韧性的力控制法研究 |
| 5. | Research on relationship between the texture and fracture strength of high quality freestanding cvd diamond films
高质量金刚石自支撑膜织构与断裂强度的关系研究 |
| 6. | The stresses induced during the process are greater than the yield strength , but less than the fracture strength , of the material
加工期间产生的应力大于屈服强度，但小于材料的断裂强度。 |
| 7. | It was found that nitrogen increased the fracture strength of silicon single crystal . we consider that the nitrogen may change the shockley band on silicon surface and form complex to influence the fracture procedure
本文从硅材料的基本概念入手，阐述了硅单晶材料的脆性断裂、脆塑转变以及在热处理过程中的翘曲研究，并通过这三个部分进行实验。 |
| 8. | The preceramic polymer pyrolysis appearing in late 20th century is a new route to fabricate porous ceramics , and it has attracted increasing attention in recent years because of its many advantages , such as low sintering temperature , flexible processing route , high fracture strength , and so on
先驱体转化法制备多孔陶瓷是20世纪末才出现的一种新型工艺，它具有烧结温度低、成型工艺简单、所得制品强度高等优点，引起了科学技术界的广泛兴趣。 |
| 9. | The physical properties were measured using x ray diffraction analyzing , sem observing , fracture toughness and fracture strength measuring , micro - hardening and density detection etc . the results display that the relative densities are above 98 % for all the samples , especially reaches 99 . 8 % for the sample added 2vol % sic nano - particles
在sic加入量为2vol %时，由于分散比较均匀，对样品烧结性能影响不大，相对密度可达99 . 8 % 。在未加sic时，四方zro2的含量最高为50 . 5vol % 。随sic加入量的增加，四方相zro2的含量呈下降趋势。 |
| 10. | What ' s more , the amount of oxygen precipitates , dislocations in silicon and the orientation of the pressed surface also influence the fracture strength . stress - strain curves were studied at room temperature . in another experiment , brittle - ductile transition ( bdt ) of ncz and cz were studied for first time
常温下氮硅单晶( ncz )及普通硅单晶( cz )的断裂强度研究发现，氮的掺入提高了机械性能，并且不同氧沉淀量、位错的存在及不同晶向对硅材料机械强度也有较大影响。 |
